The Cebora BI-WELDER TIG 2040 DC-HF is a single-phase inverter power source for TIG and MMA-SMAW use, excluding AWS6010 cellulosic electrodes, designed for maintenance work and small production batches.
The machine offers pulsed arc, for use on thin guage material where heat transfer must be minimal and is set up for remote control using the foot control (Part No: 193), remote control (Part No:187), or up-down control on the torch.
The following gases may be used for protection: argon, argon/helium, hydrogen argon. In TIG mode, the arc is started either in high frequency or by contact with the Cebora lift system.
It is also possible to save up to 9 welding programs in memory.
The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%). The power source can be powered by motor generators of adequate power (Min. 6 KVA).
|Input Voltage 50hz||110V / 230V|
|Welding current amps||5 - 200A|
|Output @ 60% duty cycle||160A tig 140A mma - 230v|
140A tig / 90A mma - 110v
|Output @ 100% duty cycle||140A tig 115A mma - 230v|
110A tig / 75A mma - 110v
|Protection||IP 23 S|
|Fuse Rating||16A - 230v|
25A - 115v
|Packed Dimensions (HxWxL) mm||176 x 450 x 402 mm|
To make an enquiry please call us on 01794 521355 or use the Make Enquiry button below!